unRAID NAS Server Pro 6.8.1 开心版
下载地址：（解压密码：hopol）
unRAIDServer-6.8.1-x86_64_k_fu11.7z.001
unRAIDServer-6.8.1-x86_64_k_fu11.7z.002
压缩包里已经集成了破解文件和算号器。
解压后截图
食用方式
将U盘格式化为FAT32格式，名称为：UNRAID
将解压出来的所有文件拷贝到U盘根目录下
用管理员权限运行 make_bootable.bat
将U盘插入设备并启动，正常引导之后会看到当前获取到的 IP。
我这里直接插入网线，上级有DHCP服务器，所以直接获取到局域网IP。
浏览器输入IP，默认打开的页面就能看到 Flash GUID
格式为 XXXX-XXXX-XXXX-XXXXXXXXXXXX ,复制备用。
拔下引导U盘，插入PC端，输入如下：
命令格式
keymaker XXXX-XXXX-XXXX-XXXXXXXXXXXX
中间有空格，生成一个XXXX-XXXX-XXXX-XXXXXXXXXXXX.key文件。
将这它重命名为：BTRS.key ，并拷贝到 U盘 config 目录下。
将引导U盘重新插入设备并开机，一切就结束了！！！
相关：
Changes
Version 6.8.1 2020-01-10
Base distro:
- libuv: version 1.34.0
- libvirt: version 5.10.0
- mozilla-firefox: version 72.0.1 (CVE-2019-17026, CVE-2019-17015, CVE-2019-17016, CVE-2019-17017, CVE-2019-17018, CVE-2019-17019, CVE-2019-17020, CVE-2019-17021, CVE-2019-17022, CVE-2019-17023, CVE-2019-17024, CVE-2019-17025)
- php: version 7.3.13 (CVE-2019-11044 CVE-2019-11045 CVE-2019-11046 CVE-2019-11047 CVE-2019-11049 CVE-2019-11050)
- qemu: version 4.2.0
- samba: version 4.11.4
- ttyd: version 20200102
- wireguard-tools: version 1.0.20200102
Linux kernel:
- version 4.19.94
- kernel_firmware: version 20191218_c4586ff (with additional Intel BT firmware)
- CONFIG_THUNDERBOLT: Thunderbolt support
- CONFIG_INTEL_WMI_THUNDERBOLT: Intel WMI thunderbolt force power driver
- CONFIG_THUNDERBOLT_NET: Networking over Thunderbolt cable
- oot: Highpoint rr3740a: version v1.19.0_19_04_04
- oot: Highpoint r750: version v1.2.11-18_06_26 [restored]
- oot: wireguard: version 0.0.20200105
Management:
- add cache-busting params for noVNC url assets
- emhttpd: fix cryptsetup passphrase input
- network: disable IPv6 for an interface when its settings is "IPv4 only".
- webgui: Management page: fixed typos in help text
- webgui: VM settings: fixed Apply button sometimes not working
- webgui: Dashboard: display CPU load full width when no HT
- webgui: Docker: show 'up-to-date' when status is unknown
- webgui: Fixed: handle race condition when updating share access rights in Edit User
- webgui: Docker: allow to set container port for custom bridge networks
- webgui: Better support for custom themes (not perfect yet)
- webgui: Dashboard: adjusted table positioning
- webgui: Add user name and user description verification
- webgui: Edit User: fix share access assignments
- webgui: Management page: remove UPnP conditional setting
- webgui: Escape shell arg when logging csrf mismatch
- webgui: Terminal button: give unsupported warning when Edge/MSIE is used
- webgui: Patched vulnerability in auth_request
- webgui: Docker: added new setting "Host access to custom networks"
- webgui: Patched vulnerability in template.php