unRAID NAS Server Pro 6.11.1 学习版
特别鸣谢
PRYANIK@softoroom
下载地址:(解压密码:hopol)
unRAIDServer-6.11.1-x86_64_fu11.7z
https://mega.nz/file/MY4FBbKR#tfVVGyo5KIjNl0YF9qBZ2KH5f56RdvV9BeucD2IBihw
临时下载链接:
学习方法
自己打开 crack 目录看吧!
文件截图:
懒得截图了,我又不用unRAID!
更新日志:
## Version 6.11.1 2022-10-06
### Improvements
Updated both qemu and libvirt to latest versions:
- Added ppc, riscv32/riscv64, and aarch64 support.
Updated docker to v20.10.18 and improved networking:
- When DHCP is used, wait for IPv4 assignment before proceeding on system startup, this avoids a
possible race-condition at boot time when host access to custom networks is enabled.
- Allow user defined networks to be reconnected at docker service start. Now all defined networks
will be automatically reconnected.
VM Manager improvements:
- Implemented option to use Virtiofs for mapping of Unraid host shares into a VM.
- Added Spice html client for Virtual Machines (experimental).
### Notable Bug fixes
- Fixed issue where opening certain pages, eg, Dashboard, needlessly causes writes to the USB Flash boot device.
- Fixed the issue of docker containers can reach the Internet when the WG tunnel is not autostarted
at system boot up. **Users are advised to regenerate the WG configs.** This can be done, e.g., by
clicking in a field to change a value and then change it back in order to get the Apply button to light
up. Then click Apply.
- Fixed issue where empty popup windows gets displayed with certain browsers and devices.
- Restored "NTLMv1 authenication" for incoming SMB connections.
相关
版权声明:
作者:hopol
链接:https://www.hopolcn.com/2022/10/2094/
来源:HopoL's Blog
文章版权归作者所有,未经允许请勿转载。
THE END
二维码
文章目录
关闭
luffy
不敢用,怕被人加料,之前看到有人爆料加了挖矿木马
hopol@luffy
有木有 爆料帖 我去瞧瞧~~ 感谢@~
番茄@hopol
有木马的是国内的某些人N次封装的
hopol@番茄
O 原来如此~ 感谢告知,谢谢!~
番茄@luffy
这是自己开心的 一手源 不用怕
番茄@luffy
仔细看HELP 文档 是全部源代码方式开心的
Shirts@luffy
你确定你的NAS配置能挖得动矿
burt
I have no idea how to “crack” this…I don’t understand the “instruction’s”, for Windows
SmOg
Any chance to have a little bit more details on the build steps?
Some don’t make any sense (or missing a few steps) to finish the build process.
Thank you!
sucrearm
worst crack ever. at this piont can anyone even confirm it works?
AnonHopoL_User@sucrearm
Updated version… https://bayfiles.com/fbH016F2y1/autoGUID_unRAID_NAS_Server_Pro_6.11.1_zip
easyhopo
网盘要梯子?
AnonHopoL_User
如果你们愿意,我可以上传一个已编译的破解,但如果要验证没有恶意代码,那么自己构建一个破解的重点。 (希望这是有道理的,这是谷歌翻译的)
I can upload a compiled crack if you guys like, but the whole point of building one yourself if to verify there is no malicious code. (hope this makes sense, this was Google translated)
SmOg@AnonHopoL_User
That would be awesome, or if anyone is paranoid, you can also give a bit more detailed steps to build our own crack.
Thanks
AnonHopoL_User@SmOg
Its kind of mentioned in the help file in the original crack folder. You basically need to go to the “unraider” folder and run “make all” in a terminal in a Linux distro after you place the files in the corresponding folders. You might have to install any other requirements if any errors pop up.
burt@AnonHopoL_User
PLEASE upload a working crack 🙂
AnonHopoL_User@AnonHopoL_User
https://bayfiles.com/yf03ufF9y0/hopol_unRAID_NAS_Server_Pro_6.11.1_zip
SmOg@AnonHopoL_User
Thank you. Especially the one (kinda crucial part in the GO file) – where we need to update the FLASH_GUID. I know it sounds silly, but any casual user might think that the GUID would be also spoofed, but obviously, that is not the case here.
All works, thank you!
AnonHopoL_User@SmOg
I just posted an updated version where you no longer have to manually enter the GUID part to make it less of a hassle. 🙂
AnonHopoL_User@AnonHopoL_User
Updated version… https://bayfiles.com/fbH016F2y1/autoGUID_unRAID_NAS_Server_Pro_6.11.1_zip
burt@AnonHopoL_User
Thankyou so much for the new working “crack”, I downloaded the genuine 6.11.1 with USB creator, added the crack files, and it worked first time 🙂
lettuce
The registered GUID does not match the USB Flash boot device GUID.
Registered GUID: 058F-4623-
Flash GUID: 058F-4623-0000-000053B533AB
AnonHopoL_User@lettuce
Updated version… https://bayfiles.com/fbH016F2y1/autoGUID_unRAID_NAS_Server_Pro_6.11.1_zip
burt@AnonHopoL_User
Hello, just want to say that this is a newer crack than the one first posted a couple of days ago, very easy !!!
AND Unraid 6.11.2 was just released and I got it to work with this new crack 🙂
Simply download the genuine file from Unraid, use their USB Creator tool, copy the crack, and it’s gone. Thank you so much.
burt@burt
So, there was a problem with 6.11.2, so there is now a newer build, 6.11.3, and I’m pretty confident that the autoguid will work with as well 🙂
burt
Unraid 6.11.4 came out a couple of days ago, and I was expecting this autoguid to work with it, as it did with 6.11.3, but unfortunately, it’s again asking for the USG GUID 🙁
burt
I made a typo in my last msg, should have been USB GUID, (not USG).
Anyway, Unraid 6.11.5 is now out….