UBNT 恢复出厂模式

8,862 views次阅读
没有评论

恢复出厂模式操作办法

 

UBNT 先通电,等待1分钟开机完毕后,按住恢复默认按钮20秒左右,再等待大概1分钟。

UBNT 就会重启进入出厂状态。

 

第一次出厂状态下登录UBNT

 

1. 选择国家语言,

2. 选择 国家代码 COMPLIANCE TEST,

3. 填写 用户名 和 密码,默认为 ubnt,

4. 打上 勾,

5. 登录 完成。


 

下面的自用备份,有密码。请勿下载!!!

UBNT配置文件-自用有密码

正文完
 0
HopoL
版权声明:本站原创文章,由 HopoL 于2015-02-24发表,共计182字。
转载说明:除特殊说明外本站文章皆由CC-4.0协议发布,转载请注明出处。
评论(没有评论)

HopoL's Blog

文章搜索
最新评论
HopoL HopoL full
19731973 19731973 so is this the full os or just a update file
HopoL HopoL Yeah, back in the older Unraid versions, some folks managed to get it booting from drives like SATA or NVMe by compiling the software themselves. But that method never got updated or maintained afterward, so it might not work with the current setups. Hope that helps!
MickeyDee MickeyDee Slightly off topic but anyone managed to get Unraid to boot off anything other than USB, like sata or nvme? If wrong place please delete and advise
Mrg Mrg I cannot Thank you enough. Thank you , Thank you , Thank you.
阿龙 阿龙 谢谢大佬分享
MickeyDee MickeyDee Cancell that, figured it out and it works, Much appriciated .
MickeyDee MickeyDee Hi Thanks for sharing, please clarify, do you mean Rename the folder "unraider-7.2.0" to unraider and copy it to the config . Thanks
lzdwudi lzdwudi 我也想试试 但我目前的版本是6.12.13 我不敢做大的动作
wice222 wice222 archive is demaged